Tender № for Pipeline Insulation Material Purchase

Purchase of:

−       Bonded heat-insulating foam glass elbow, density 130 kg/m³, size 65×40.

−       Bonded heat-insulating foam glass elbow, density 130 kg/m³, size 169x90.

−       Bonded heat-insulating foam glass elbow, density 130 kg/m³, size 173x90.

−       Bonded heat-insulating foam glass elbow, density 130 kg/m³, size 219x40.

−       Bonded heat-insulating foam glass elbow, density 130 kg/m³, size 224x40.

−       Bonded heat-insulating foam glass elbow, density 130 kg/m³, size 224x40.

−       One‑piece heat-insulating foam glass elbow, density 130 kg/m³, size 119x40, 94х60, 65х40.

−       Heat-insulating foam glass segment, density 130 kg/m³, sizes ranging from 173×80 to 767×50.

−       Heat-insulating foam glass shell, density 130 kg/m³, sizes 94×110, 168×80, 173×80, and 210×60.

−       Heat-insulating foam glass shell, density 130 kg/m³, sizes ranging from 33×40 to 168×50.

−       Self‑adhesive vibration‑damping sealant reinforced with aluminium foil (sheet format 900×600×2.3 mm).

−       Cold‑rolled stainless steel sheet, grade 08Х18Н10 (sheet BT‑PN‑O, 0.80×500×1000, made of steel grade 12Х18Н9).

−       Dry gypsum‑based adhesive mix, TS 23.64.10‑011‑04001508‑2017.

−       Two‑component polyurethane adhesive‑sealant.

−       Foil butyl rubber tape, size 250×2 mm.

−       Needle‑punched fibrous thermal heat-insulation mat, grade IPS‑T‑1000.

−       Aluminium foil for technical purposes, type DPRHM 0,10×500 ND AD1M.

−       Cold‑rolled stainless steel tape/strip, grade 12Х18Н9, 0,7×20-M‑NT‑O‑12Х18Н9-3‑G).

−       Adhesive tape.

−       Stainless steel strapping tape / strip, size 0,5×20.

−       Cold‑rolled stainless steel sheet, grade 12Х18Н9.

−       Steel sheet, type BT‑PN‑O, 0,80×500×1000, grade 12Х18Н9.

−       Steel sheet, type BT‑PN‑O, 1,6×500×2000, grade 12Х18Н9.

−       High‑alloy corrosion‑resistant and heat‑resistant steel wire (High-alloy wire, dia 4 mm).

−       Aluminium rivets with semi‑round heads, accuracy classes B and C (Aluminium rivet 4×24).

−        Submission of necessary technical documentation (mandatory permits, drawings, certificates of the Technical Regulation of the Customs Union, and other documents as specified in the supplier's technical documentation list).

−        Full compliance with the Company's requirements to technical equipment as detailed in the relevant data sheets;

−        The supplier shall have experience with the production/supply of this type of material.